The evolution of the exhaust diesel soot adsorptive properties after NO2 exposure and according to their SOF content

Several samples of exhaust diesel soot are investigated by inverse gas chromatography and linear solvation energy relationship (LSER) modelling according to their soluble organic fraction content and their time of exposure in oxidative conditions. The results demonstrate the evolution of the adsorptive properties of the studied materials towards volatile compounds during the oxidation under NO₂.     

Crystallization Mechanisms and Rates of Cyclopentane Hydrates Formation in Brine

Clathrate hydrates most often grow at the interface between liquid water and another fluid phase (hydrocarbon) acting as a provider for the hydrate guest molecules, and some transfer through this shell is required for the hydrate growth to proceed, thus self‐limiting the reaction rate. An optical microscope and a horizontal reaction cell are utilized to capture the shell growth phenomenology and to estimate the hydrate layer growth rates from sequential pictures. Cyclopentane (CP) is chosen as the hydrate‐forming molecule to obtain hydrates at low pressure. Experimental hydrate layer growth rates are provided for the CP+brine system, using various combinations of salts and degrees of subcooling.     

Improving the transfer of near infrared prediction models by orthogonal methods

Eight calibration transfer methods based on the removal of orthogonal signal were compared for the standardization of whole soybean protein and oil models. Dynamic orthogonal projection (DOP), transfer by orthogonal projection (TOP), error removal by orthogonal subtraction (EROS), orthogonal signal correction (OSC), and orthogonal projections to latent structures (O-PLS) as well as the modification and extension of some of these methods were compared in the transfer of models in intra and inter-brand situations using two Foss Infratecs and two Bruins OmegAnalyzerGs. For each brand, a master was designated and its models transferred onto the second unit of its network and the two units of the second brand. Calibration models were transferable from brand to brand with similar or better precision than when each instrument was calibrated on its own calibration set (for Infratec 1229, the relative predictive determinant (RPD) increased in intra and inter-brand calibration transfer situations from 10.42 to 11.45 and 10.57, with DOP and EROS respectively). Performance of each method was different across parameters, instruments, and validation sets. DOP modifications on the determination of the difference matrix showed promising results while TOP and EROS extensions to include variability specifically present in certain crop years did not bring any beneficial effects.     

Experimental and Molecular Dynamics Simulations of Tribochemical Reactions with ZDDP: Zinc Phosphate–Iron Oxide Reaction

Zinc phosphate glass is considered to be the main constituent of tribofilms generated under boundary lubrication with zinc dialkyldithiophosphate (ZDDP), a well-known antiwear additive. The reaction occurring during friction between zinc phosphate glasses and steel native iron oxide layer is investigated by both an experimental approach and by Molecular Dynamics simulations (MD). The importance of this “tribochemical” reaction in the general ZDDP antiwear process is discussed.     

Performance Analysis and Modeling of Thermally Sprayed Resistive Heaters

Many processes and systems require hot surfaces. These are usually heated using electrical elements located in their vicinity. However, this solution is subject to intrinsic limitations associated with heating element geometry and physical location. Thermally spraying electrical elements directly on surfaces can overcome these limitations by tailoring the geometry of the heating element to the application. Moreover, the element heat transfer is maximized by minimizing the distance between the heater and the surface to be heated. This article is aimed at modeling and characterizing resistive heaters sprayed on metallic substrates. Heaters were fabricated by using a plasma-sprayed alumina dielectric insulator and a wire flame-sprayed iron-based alloy resistive element. Samples were energized and kept at a constant temperature of 425 °C for up to 4 months. SEM cross-sectional observations revealed the formation of cracks at very specific locations in the alumina layer after thermal use. Finite-element modeling shows that these cracks originate from high local thermal stresses and can be predicted according to the considered geometry. The simulation model was refined using experimental parameters obtained by several techniques such as emissivity and time-dependent temperature profile (infra-red camera), resistivity (four-probe technique), thermal diffusivity (laser flash method), and mechanical properties (micro and nanoindentation). The influence of the alumina thickness and the substrate material on crack formation was evaluated.     

Real options and technology management: Assessing technology migration options in wireless industry

The wireless industry is currently undergoing a major transition from second generation (2G) to third generation (3G) wireless technologies. The paper attempts to assess wireless technology migration options using the real options approach (ROA) to support the wireless network operators’ strategic decisions: to migrate or not, if so, which migration path to take. The preliminary result shows that the evolution of wireless network technologies between generations is desirable, but not within generations. Finally, from a strategic perspective, we should consider the possible challenges that may hinder migration. By identifying these challenges, we can be more watchful of transition pitfalls and can choose a better alternative.     

Back-end soft and hard defect monitoring using a single test chip

The objective of this paper is to present a mixed test structure designed to characterize yield losses due to hard defect and back-end process variation (PV) at die and wafer level. A brief overview of the structure, designed using a ST-Microelectronics’ 130 nm technology, is given. This structure is based on a SRAM memory array for detecting hard defects. Moreover each memory cell can be configured in the Ring Oscillator (RO) mode for back-end PV characterization. The structure is tested in both modes (SRAM, RO) using a single test flow. The test data analysis method is presented and applied to experimental results to confirm the ability of the structure to monitor PV and defect density.     

The Critical Temperature of Aluminum

The critical temperature, T _c, of metals is a fundamental point when vaporization due to high energy exchanges occurs. Although aluminum is a metal often studied as a benchmark for theories, its critical temperature is not known with a high degree of accuracy. Its determination by experiment is difficult as a result of its high value. This paper reviews the existing data and proposes new ones resulting from recent measurements of particular physical properties and recent theoretical approaches. These new estimates lead to the recommended value of T _c = (6700 ± 800) K.     

Comparison of the water-soluble carbohydrate composition and fructan structures of Agave tequilana plants of different ages

The composition of water-soluble carbohydrates from Agave tequilana plants of 2, 4 and 6½ years were compared by HPLC, HPAEC-PAD, MALDI-TOF-MS and GC–MS. The plants of 2 years exhibited the highest levels of free monosaccharide and low molecular weight fructans (DP 3–DP 6) with potential application as prebiotics. A maximum of fructan polymerisation was achieved at 4 years with mean DP from 3 to 30, then it was decreased at 6½ years with mean DP from 4 to 24. The linkage analysis showed an increase and decrease in the branching degree from 2 to 6½ years with a maximum at 4 years, correlated to changes in t-β-d-Fruf linkages with increased and decreased synthesis of (2→1) and (2→6)-β-d-Fruf as well as 1,6-di-β-d-Fruf linkages.     

Compaction index of cement paste of normal consistency

Knowing the virtual packing densities of all the components in a mixture is necessary to calculate its granular packing density with the compressible packing model. The calculation of these virtual packing densities is based on real packing density measurements carried out according to specific operating modes, each one with a different compaction index K. For powders, the current method consists in adding water to powder in a mixer until obtaining a smooth paste (K = 6.7). But this method remains subjective since the degree of smoothness achieved is estimated by the operator. The objective of this work is to put forward a more rational alternative method based on tests of normal consistency used in cement plants. This paper presents experiments on binary mixtures (cement–mineral admixtures), with or without superplasticizer, which have resulted in a compaction index K = 4.8. Using these results, the amount of water (given in the technical data sheet) needed to obtain a normal consistency allows the calculation of virtual packing densities of standardized cements. However, if a superplasticizer is used it is necessary to carry out this test. Its saturation proportion can also be estimated with the test of normal consistency.